Dismantling The Belts - Husqvarna ProFlex 18 ProFlex, 20 ProFlex Operator's Manual

Dismantling the belt
Starting point when dismantling the belt:
• No unit attached to the Rider.
• The front of the belt is hung around the hook
guard's handle.
How the front of the belt is removed from the front
belt pulley is evident from sections 5–8, on page 27.
The entire belt is only dismantled as set out below,
when the snow plough is fitted on the Rider.
1. Dismantle the steering plate under the support
wheel. Use two 13 mm socket spanners.
2. Unhook the spring on the blade brake.
3. Pry off the belt from the intermediate pulley and
remove the belt.
MAINTENANCE
31
English –