Checking And Adjustment Of Throttle Wire - Husqvarna ProFlex 18 ProFlex, 20 ProFlex Operator's Manual

Checking and adjustment of the throttle
wire
Check that the engine responds to the throttle
control and that the correct engine speed is
achieved at full throttle.
If in doubt, contact the service workshop
If necessary the following adjustment can be made:
1. Release the clamping screw and push the
throttle control to full throttle position.
2. Pull the throttle wire's outer casing to the right
and tighten the clamping screw.
MAINTENANCE
37
English –