Prosharp SkatePal-Pro² Original Instructions Manual page 4

Read the operating instructions carefully before using the machine.
Operations that are not in accordance with the manual and/or disregard safety instructions
may cause injury or death, and damage the machine.
Description of the machine: Ice skate sharpener.
Safety Information
 ProSharp SkatePal-Pro² may only be used for sharpening skates.
 Only the original ProSharp EP- grinding wheels are to be used in the machine.
 No modifications or design changes are allowed.
 All operators must read and understand instructions,
regarding operation and maintenance contained in this manual, before using the machine.
 Operators under 18 years of age are NOT allowed to use the machine.
Hazards
 Before using the machine, ensure there are no damages caused, for example, during
transport.
 The SkatePal is equipped with grinding tools which may cause injury.
 The operator must stand in front of the machine.
 Children and others than the machine operator must be kept away from the machine at a
safe distance of 2 meters.
 The operator may never bend over or place hands on the machine during skate
sharpening.
 Grinding dust can escape from the machine; therefore the operator must wear protective
eyewear and breathing protection when machine is in use. It is also highly recommended
to use ear protection, when the machines sound-level during sharpening due to
differences in the skate-steels, can exceed beyond pleasant level, or in worst case harm
your hearing.
Connection
 Connect the power cord, 1-phase, 100-240 volt, 50 - 60 Hz.
Placement
 The machine must be placed on a flat,
steady work bench with a height between 80 to 100 cm.
Maintenance
 Control and clean the machine daily after the usage,
and always after every 30 pairs of skates.
 Remove the plug before carrying out any adjustment, servicing or maintenance.
Original Instruction Manual