Advertisement
Quick Links
ProSharp SkatePal-Pro²
ORIGINAL INSTRUCTIONS
Read the installation and operating instructions carefully before using the machine.
Usage that is not in accordance with the instruction manual and/or disregard safety
instruction, may cause injury or death, and damage the machine.
Advertisement
Related Manuals for Prosharp SkatePal-Pro²
Summary of Contents for Prosharp SkatePal-Pro²
- Page 1 ProSharp SkatePal-Pro² ORIGINAL INSTRUCTIONS Read the installation and operating instructions carefully before using the machine. Usage that is not in accordance with the instruction manual and/or disregard safety instruction, may cause injury or death, and damage the machine.
- Page 2 1. Read the Instructions Manual featured on the next page carefully! Continue from here after that. 2. Setup and sharpening: A. Place the machine on a flat and steady workbench, with a height between 80 and 100 cm. B. Make sure that your ear, eye and breathing protection gear is being worn correctly! C.
- Page 3 After sharpening unplug the power cord. Open the grinding wheel door and clean the machine inside with a vacuum cleaner or with a magnetic stick. Clean the machine after use, and always before transport. IMPORTANT! Machine’s life time is directly reflected to the maintenance of the machine! Always lock the machines locks on both ends when transporting.
- Page 4 Safety Information ProSharp SkatePal-Pro² may only be used for sharpening skates. Only the original ProSharp EP- grinding wheels are to be used in the machine. No modifications or design changes are allowed. All operators must read and understand instructions, regarding operation and maintenance contained in this manual, before using the machine.
- Page 5 7mm hollow = XXS (7mm) to 28mm =2XL (28mm) to entirely flat = XX. Other radius of hollows can be ordered from ProSharp with an 8 weeks delivery time. 2. Open the grinding wheel door; release the grinding wheel thumbscrew by turning to the left.
- Page 6 Adjusting the grinding wheel sideways Adjust the grinding wheel in small steps, 1/8 round at the time. An easy way of changing position of the grinding wheel is to first drive the wheel to the left, so you get more room to adjust the screw.
- Page 7 Read the installation and operating instructions carefully before using the machine. Usage that is not in accordance with the instruction manual and/or disregard safety instruction, may cause injury or death, and damage the machine. Installation instructions Unpacking and installation: Open the SkatePal by unlocking the locks on both sides of the machine with one of the two(identical) included keys.
- Page 8 Don’t force the machine. It will do the job better and safer at the rate for which it was designed. When not in use always disconnect the power cords. Stay alert. Watch what you are doing, use common sense and do not operate the machine when you are tired.
- Page 9 A tip is to start by using an old skate, that way you will not take the risk of damaging more expensive skates. ProSharp Toe Pick protector is not included with the machine, call us, or visit our website for details.
- Page 10 Explanation of symbols marked on the skate sharpener ProSharp SkatePal-Pro² Business name and manufacturer Authorized service representative Eriksson Teknik AB ProSharp AB Hirsvägen 4 Hirsvägen 4 862 41 Njurunda 862 41 Njurunda SWEDEN SWEDEN T. +46 60 15 85 80 T.
- Page 11 Warranty The warranty applies for one year for materials and workmanship. The manufacturer is not responsible for defects or faults that arise from normal usage, negligent maintenance or other neglect, unauthorized tampering, improper use, service or repairs performed by others than those approved by the manufacturer, as well as variations in electrical voltage or other electrical disorders.
Need help?
Do you have a question about the SkatePal-Pro² and is the answer not in the manual?
Questions and answers