Ecobee SMART Installation Manual page 18

low Temperature Alert Select this to set the
temperature at which the Smart Thermostat will
generate a Low Temperature Alert. The range can be:
Off – no alert will be generated
Set temperature range of 35 – 68°F (1.5 – 20°C).
High Temperature Alert Select this to set the
temperature at which the Smart Thermostat will generate
a High Temperature Alert. The range can be:
Off – no alert will be generated
Set temperature range of 76 – 104°F (24.5 – 40°C).
low Humidity Alert Select this item to set the humidity
level at which the Smart Thermostat will generate a Low
Humidity alert. The range can be adjusted to:
Off – no alert will be generated
Set humidity range of 5 – 95% R.H. in 5% increments
High Humidity Alert Select this item to set the humidity
level at which the Smart Thermostat will generate a High
Humidity alert. The range can be adjusted to:
Off – no alert will be generated
Set humidity range of 5-95% R.H. in 5% increments
Auxiliary Heat Run-time Alert (optional)
In a heat pump with auxiliary heat configuration, you
can program the Smart Thermostat to generate an alert
if the auxiliary heat runs for more than this programmed
amount of time during a 24-hour period.
Auxiliary Outdoor Temperature Alert (optional)
In a heat pump with auxiliary heat configuration, you can
program the Smart Thermostat to generate an alert if the
auxiliary heat is called for when the outdoor temperature
exceeds this programmed set point (this feature requires
an internet connection to function properly)
Enable Alerts to be displayed on console
Select No, if you do not want any of the alerts to be display
on the touch screen interface. Alerts will continue to be
displayed on the web portal and sent via email.
Enable Heating and Cooling Alerts
Select No, if you do not want the Thermostat to generate
the System Failed to Heat or Cool alerts. If disabled, these
alerts will not be shown on the Thermostat or web portal
and no emails will be sent.
31 Configuring The Smart Thermostat
List of Alerts
Below is a complete list of alerts. Depending on your
configuration, some of these may not apply to your system.
low Battery
The battery in your Thermostat will need
to be changed soon.
Furnace Air Filter Your furnace filter needs to be
cleaned/changed.
Ventilator Filter Your ventilator filter needs to be
cleaned/changed.
uV lamp
Your UV lamp needs to be changed.
Humidifier Filter
Your humidifier pad needs to be
cleaned/changed.
Comms fault
There is no communication between the
Thermostat and the Equipment Interface
module.
low Temp. Alert
The temperature in the home is too low.
High Temp Alert
The temperature in the home is too high.
low Humidity Alert
The humidity in the home is too low.
High Humidity Alert
The Humidity in the home is too high.
Heat Not
The system has failed to heat the home.
Responding
Cool Not The system has failed to cool the home.
Responding
Input 1
Used if this input is programmed to
generate an alert.
Input 2
Used if this input is programmed to
generate an alert.
Maintenance
You are due for regular maintenance.
Reminder
Auxiliary Heat
Your auxiliary heat source is running
Run Time
too often.
Auxiliary Outdoor
Your auxiliary heat source is running
Temperature
at higher than expected outdoor
temperatures.
Configuring The Smart Thermostat 32