Honda VFR800A 2005 Owner's Manual page 202

5. Remove the fixing bolts ( ) and
remove the right caliper assembly ( ).
To avoid damage to the brake hose
during removal, support the caliper
assembly so that it doesn't hang from
the hose. Do not twist the brake hose.
Avoid getting grease, oil, or dirt on
the disc or pad surfaces. Any
contamination can cause poor brake
performance or rapid pad wear after
reassembly.
5
6
If You Have a Flat Tire
6. Remove the axle bolt ( ), and then
loosen the right and left axle pinch bolts
( ). 8
RIGHT FRONT
(7)
(7) axle bolt
(8) axle pinch bolt
Taking Care of the Unexpected
7
(8)
(cont'd)
193