Engine Oil & Filter
8.
Apply a thin coat of engine oil to the
rubber seal ( ) of a new oil filter.
4
(4)
(4) oil filter rubber seal
9.
Install the new oil filter and tighten it by
hand.
10.
Using an oil filter wrench attachment
and a torque wrench, tighten the new oil
filter to the specified torque:
20 lbf·ft (26 N·m , 2.7 kgf·m)
112
Servicing Your Honda
11.
Check the condition of the sealing
washer on the drain bolt. Replace the
washer every other time the oil is
changed.
Install the drain bolt and tighten it to the
specified torque:
22 lbf·ft (29 N·m , 3.0 kgf·m)
Add Engine Oil:
12.
Fill the crankcase with the
recommended oil (page
approximately:
3.3 US qt (3.1 )
13.
Install the oil filler cap.
105
),