Omron Powli BU75RW Instruction Manual page 61

6. Attach the plate cover.
Insert the tab on the left side of the plate cover into the hole in the BU75RW/BU100RW
push the plate cover toward the BU75RW/BU100RW.
Securely tighten the screw that was removed from the right side of the plate cover.
7. Attach the front panel.
Insert the tab on the right side of the front panel into the hole in the main unit
plate cover towards the main body.
Use a screwdriver to securely tighten (turn clockwise) the 2 screws on the left side of the front
panel.
Battery replacement is complete.
<After replacing the battery during operation...>
If the battery replacement indicator is displayed and the beeper sounds before replacement,
press the beeper stop/test button once to stop the beeper, and hold it for 5 sec. to perform a
self-diagnostic test. The beeper stops and normal operation resumes after the 10-second test
is complete.
<After replacing the battery when operation was stopped...>
Connect to commercial power and turn ON the unit's power switch. When operation starts, the
self-diagnostic test is automatically performed. Normal operation resumes after the 10-second
test.
Write the date you start using the battery on the included battery usage start
date label, and attach the label to the unit.
75
BU RW/BU
Tighten the screw.
Insert the tab on the
right into the main unit.
100 200
RW/BU RW/BU
, and push the
300
RW
, and
6
49