TRAINING MANUAL
CONTROL PANEL
TOP COVER
WM0742HGA
DISASSEMBLY/REPAIR
Page 33
(Control Panel)
Remove the 7 screws on the back cover of
the control panel.
Remove the rear cover.
Roll the control panel forward. Lay a towel
or soft cloth on the washer to prevent
damage to the control panel.
Unplug all the connectors.
Remove 5 screws and take the board out
of the control panel.
Open the dispenser lid and remove the 4
screws.
Take the lid assembly out of the top cover.
Release the plastic tabs that hold the
dispenser assembly into the top cover.
Put your hand into the hole left by the
dispenser and hold the top cover.
Use a putty knife or a thin blade to release
the clip and lift the top cover. Repeat the
process on the other side of the cover and
raise the cover off the machine.
Be careful to avoid letting it fall on you
while you are working in the machine.
WM0742HGA
TRAINING MANUAL