LG WM0742H Series Training Manual page 26

TRAINING MANUAL WM0742HGA
select the desired cycle and options (as described above,) and then press and hold the
CUSTOM PROGRAM for at least 3 seconds, until it beeps twice. Thereafter, simply press
POWER, CUSTOM PROGRAM, and START to use this cycle.
TUB CLEAN
The TUB CLEAN cycle is designed to use extra hot water and a long wash cycle to
remove soap scum and residue from the inside of the tub. Use it once a month to keep
the washer clean and to prevent mildew and odor. Do not put laundry in to the tub
during the TUB CLEAN cycle.
Press POWER and select any cycle. Then, press and hold TUB CLEAN for three seconds.
The PRE-WASH pad will illuminate and the display will show tcL. Additives, such as one to
remove the soap scum from whirlpool baths, can be added via the dispenser. Press
START. The door will lock and the display will show 1:26. The steam generator will be
operated until 0:53 shows on the display. The water level will display approximately 225.
The tub will rotate and the recirculation pump will operate throughout the tub clean
cycle. Near the end of the tub clean cycle, the washer will pump out the water and spin at
960 rpm until the end of the cycle. We recommend draining the water from the sump
after running a tub clean cycle to ensure there are no residual cleaners or chemicals that
might damage any subsequent load of laundry.
EXTRA RINSE
The EXTRA RINSE cycle inserts a second rinse cycle, which extends the cycle time
accordingly.
RINSE+SPIN
RINSE+SPIN is provided to rinse laundry and spin it before drying it. It is most often
used for previously washed laundry that was inadvertently left in the washer instead of
being promptly transferred to the dryer or clothesline. Rinse temperatures are limited to
COLD or WARM water. Changing the spin speed to EXTRA HIGH increases the cycle
time by 0:04 minutes.
DELAY CYCLE
The DELAY CYCLE button allows the user to put laundry into the machine, add the
appropriate additives (HE detergent, softener, and bleach,) set the desired cycle and
options, and delaying the start tome for up to 12 hours in 1-hour increments. This
option is used to have the laundry ready to come out of the washer at a certain time, like
when the customer gets home from work or after school, etc.
WM0742HGA Page 24 TRAINING MANUAL