Table of Contents
Advertisement
6.5
Print-related Problems
$
Print faint or of poor quality
$
Do you use the right paper? See Chapter 8 Technical Data which con-
tains the paper specification. Change the paper if it does not comply to
this specification.
$
Does the ribbon need to be changed? Replace it by a new one if
necessary.
$
Is the ribbon cassette properly installed?
$
Ribbon path not o.k. ?
$
Print gap incorrect. Press
$
Coppies not dark enough. Don´t use old action paper!
$
Characters are not printed evenly or are not uniform in pitch
$
Examine the paper path for dirt or other obstacles that may cause the
gap between print head and platen to vary. Remove the obstacles.
$
Print lines overlap
$
Examine the paper path for dirt or other obstacles. Remove the
obstacles.
$
Part of printed text is missing (loss of data)
$
If you are using Serial communication channel check the buffer control
setting in Set-up.
$
Check the data flow control setting on the host computer.
Troubleshooting and Diagnostics
twice.
6-9
Advertisement
Table of Contents
