Table of Contents
Advertisement
Getting Started
$
Step 3:
Only for PP 806 and PP 809: insert the Paper Guide (1) into the
right slot (2) and push it against the housing [1.]. Then insert the
left side into the slot (3) and shift it into the printer [2.].
The standard setting of the paper source is TRACTOR LOWER .
If the paper source must be changed follow the steps on the next
page.
The Paper Guide supports the paper feeding from the tractor into
Note:
the transport rollers of the printer. Such an optimum line
registration is achieved and prevent the paper from generating
waves which let the form slide off the tractor.
$
Insert the the manual sheet feeder for printer PP 806 (see next page) and
start for all printers the Test Printout (see paragraph 1.9 Test Printouts)
1-16
Advertisement
Table of Contents
