Wildview Xtreme 3 User Manual page 25

STC-TGL3M
ESC: To exit delete setting.
o
2. Simply remove the battery from the battery
compartment. This will delete the image stored in the
internal SDRAM memory
CAUTION:
Do not remove the battery until you have down
loaded all the images in the internal SDRAM. Once
the battery is removed, all images in the internal
SDRAM will be deleted. (This does not apply to
images stored in SD card)
RED LED indicator will blink when battery is low.
Turn off the camera. Down load the pictures
immediately. DO NOT attempt to replace the
batteries before you save the images in your PC.
Once the battery is drained completely, or if you
attempt to replace the battery, all images in the
internal SDRAM memory will be lost.
www.wildviewcam.com Toll Free 888-304-6125 25