Switching The Device On/Off; Adjusting The Volume; Screen Operation - Skoda Columbus Operating Instructions Manual

and - buttons for moving forwards/backwards
10
 
›
RADIO-Mode - for the selection of the stations from the preset
list.
›
MEDIA-Mode - for the selection of the previous or following
track.
›
TV-Mode - for the selection of the TV stations.
CD/DVD case
11
Display
12
- Eject CD/DVD
13

- Switch on voice control
14

Menu button
15
›
RADIO mode - Turn for manual tuning; press briefly to start/
stop the automatic play function (scan).
›
MEDIA mode - Turn to change track, press briefly to start/stop
the automatic play function (scan) when in audio mode.
›
Turn map display (MAP) - in order to change the map scale;
press briefly for repeating a navigation announcement during
active route guidance.
›
Navigation (NAV) - press briefly to repeat a navigation an-
nouncement during active route guidance.
SD memory card slot
16

Switching the device on/off

›
To switch the device on or off, press the setting knob
After switching on the unit, the last audio source that was active before switch-
ing off will be played.
If the key is pulled out of the ignition lock while the unit is switched on, the unit
will switch off automatically.
If your vehicle is fitted with the KESSY system, the unit will switch off automati-
cally after the engine is turned off and the door opened. If you open the door be-
fore turning off the engine, the unit will not switch off until the vehicle is locked.
When the ignition is switched off, the system switches off automatically after ap-
prox. half an hour (discharge protection of the vehicle battery).
4
General information

Adjusting the volume

›
To increase the volume, turn setting-up button
›
To decrease the volume, turn setting-up button
The change in volume is displayed on the screen of the unit.
14
If the volume is reduced to 0, the speakers are muted. The following symbol will
4
appear on the screen .
15
6
High volumes can cause hearing damage.

Screen operation

16

» Fig. 1 on page 3.
1
Fig. 2 Setup mode SETUP: Main Menu Setup / Setup Radio
The screen of the unit is known as a "touchscreen". Fields circled in colour on the
screen are presently "active" and are operated by touching the screen.
Some of the device functions can be operated using the multifunction steering
wheel; refer to the Owner's Manual for your vehicle.
"Function keys" on the screen
›
Active fields, which call up a function or a menu, are called "function keys".
›
For example, in the main menu Setup, press the
open the menu Setup radio

are currently in.
›
By using the function keys
to the previous menu.
CAUTION
The title lines
C
and
B D

» Fig. 1 on page 3 to the right.
1
counter-clockwise.
1
function key» Fig. 2 to
Radio
and indicate the menu you
A C
, you can change back from each menu

