Champion 93020 Owner's Manual & Operating Instructions

30 ton log splitter

Advertisement

Quick Links

OWNER'S MANUAL & OPERATING INSTRUCTIONS
30 Ton

LOG SPLITTER

MODEL NUMBER
93020
10006 Santa Fe Springs Road
SAVE THESE INSTRUCTIONS
Santa Fe Springs CA 90670
Important Safety Instructions
USA / 1-877-338-0999
MADE IN CHINA
are included in this manual.
REV 93020-20120419
www.championpowerequipment.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 93020 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Champion 93020

  • Page 1: Log Splitter

    OWNER’S MANUAL & OPERATING INSTRUCTIONS 30 Ton LOG SPLITTER MODEL NUMBER 93020 10006 Santa Fe Springs Road SAVE THESE INSTRUCTIONS Santa Fe Springs CA 90670 Important Safety Instructions USA / 1-877-338-0999 MADE IN CHINA are included in this manual. REV 93020-20120419 www.championpowerequipment.com...
  • Page 2 Have questions or need assistance? Do not return this product to the store! WE ARE HERE TO HELP! Visit our website: www.championpowerequipment.com for more info: • Product Info & Updates • Tech Bulletins • Frequently Asked Questions • Product Registration –...
  • Page 3: Table Of Contents

    93020 30 Ton LOG SPLITTER TABLE OF CONTENTS Spark Plugs . . . . . . . . . . . . . . . . . . . . . . .
  • Page 4: Introduction

    ENGLISH INTROdUCTION Introduction Accessories Congratulations on your purchase of a Champion Champion Power Equipment manufactures and sells Power Equipment log splitter . CPE designs and builds accessories designed to help you get the most from your log splitters to strict specifications . With proper use purchase .
  • Page 5: Manual Conventions

    . Please call our help line at 1-877-338-0999 situation which, if not avoided, could result in death or serious injury . CAUTION CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury . REV 93020-20120419...
  • Page 6: Safety Rules

    Keep work zone clear of debris while working to can start fires around dry vegetation . ensure safe footing . A spark arrestor may be required . The operator should contact local fire agencies for laws or regulations relating to fire prevention requirements . REV 93020-20120419...
  • Page 7 . DO NOT expose log splitter to excessive moisture, dust, or dirt . DO NOT allow any material to block the cooling slots . DO NOT use the engine if: – Equipment sparks, smokes or emits flames – Equipment vibrates excessively REV 93020-20120419...
  • Page 8: Training

    . Make sure you comply with local, state, and federal codes . Take appropriate fire-fighting equipment with you . 10 . Log splitters should be used only for splitting wood . Do not use for other purposes unless the manufacturer provides attachments and instructions . REV 93020-20120419...
  • Page 9: Operation

    . 12 . Use only your hand to operate the log splitter controls . 13 . Do not refuel the engine until it has cooled for several minutes . REV 93020-20120419...
  • Page 10: Controls And Features

    Log Catchers – Prevents split logs from falling to the ground . (17) Safety Chains – For use while towing . Splitting Beam (18) Support Leg – Supports log splitter while operating . Raise leg for towing . REV 93020-20120419...
  • Page 11: Assembly

    3 . Slide the wheel over the axel on the hydraulic oil tank . To A 4 . Install the castle nut and tighten by hand . Tighten another ¼ turn with a wrench to seat the bearing . REV 93020-20120419...
  • Page 12: Install The Beam

    NOTE The cylinder rod may need to be rotated slightly in order to properly align the the wedge . Insert a screwdriver into the bolt hole in the cylinder rod To B and slowly rotate as needed . REV 93020-20120419...
  • Page 13: Install The Engine And Hoses

    NOTE The pump outlet connection does NOT require teflon tape . The o-ring seals against the face of the fittings on the pump and hose . Tighten to approximately 12 ft-lb . Over-tightening can damage the pump . REV 93020-20120419...
  • Page 14: High Pressure Hose

    (3 .79 to 7 .6 L) of hydraulic oil to bring the level back up to the sight glass . 8 . Check oil level daily and add as needed . NOTE When temperature is below 32º F (0ºC) use universal tractor/transmission fluid . REV 93020-20120419...
  • Page 15: Add Engine Oil

    The engine is equipped with a low-oil-shutoff and will stop when the oil level in the crankcase falls below the threshold level . NOTE Check oil often during the break-in period . Refer to the Maintenance section for recommended service intervals . REV 93020-20120419...
  • Page 16: Operation

    DO NOT place the log splitter near vents or intakes position where engine exhaust fumes could be drawn into – Insert beam lock-pin in the pivot bracket occupied or confined spaces . ONLY operate the log splitter outdoors. REV 93020-20120419...
  • Page 17: Starting The Engine

    . Too much choke leads to spark plug fouling/engine flooding due to the lack of incoming air . This will cause the engine not to start . 7 . As engine warms up, move the choke lever (Item D) to “Run . ” REV 93020-20120419...
  • Page 18: Operation At High Altitude

    To alleviate high altitude issues other than the natural Back injury can result from lifting logs onto the log power loss, Champion Power Equipment can provide a splitter if proper lifting techniques are not used . high altitude carburetor main jet . The alternative main jet and installation instructions can be obtained by 4 .
  • Page 19: Maintenance And Storage

    Check and tighten all bolts and nuts before operating the log splitter . Be sure to confi rm all hose connections and hose clamps are tight before each use . It is possible for connections to vibrate loose over time . REV 93020-20120419...
  • Page 20: Changing The Hydraulic Oil And Oil Filter

    NOTE Replacement filters can be purchased from The drain plug is sealed with Teflon tape . Add 2-3 Champion Power Equipment by calling wraps of new Teflon tape as needed when replacing 1-877-338-0999 . Wix #51391 or Fram PH3682 the drain plug to prevent oil leak can also be used if needed .
  • Page 21: Cleaning

    . Contact our help line at 2 . The engine needs to cool completely before storage . 1-877-338-0999 to locate the nearest Champion Power 3 . Clean engine according to the Maintenance section . Equipment authorized service dealer for your log splitter 4 .
  • Page 22: Troubleshooting

    Excessive bouncing while towing . Under-inflated tires . Inflate tires to proper pressure . Refer to tire sidewall . For further technical support: Technical Service Mon – Fri 8:30 AM – 5:00 PM (PST/PDT) Toll Free: 1-877-338-0999 tech@championpowerequipment .com REV 93020-20120419...
  • Page 23: Specifications

    – Intake: 0 . 1 3 – 0 . 1 7 mm (0 .005 – 0 .007 in .) – Exhaust: 0 . 1 8 – 0 .22 mm (0 .007 – 0 .009 in .) Note: Tech bulletin regarding the valve adjustment procedure is on www .championpowerequipment .com . REV 93020-20120419...
  • Page 24: Parts Diagram

    93020 ENGLISH SPECIFICATIONS Parts diagram REV 93020-20120419...
  • Page 25: Parts List

    Engine Connector PMJ22J-05-02 Axle Cap PMJ30-29 Engine Bushing PMJ22G-38 Big Tension Spring PMJ30-32 GB/T 798-1988 Swing Bolt M8x28 GB/T 5782-2000 Bolt M12x70 GB/T 6170-2000 Nut M8 JB/T 8870-1999 Clamp d40 GB 1160 .2-89 Oil Scale PMJ30-10 Gear Pump REV 93020-20120419...
  • Page 26: Engine Parts Diagram

    93020 ENGLISH SPECIFICATIONS Engine Parts diagram REV 93020-20120419...
  • Page 27: Engine Parts List

    182 .131017 .02 Standard Main Jet ST188F-1040007 Valve Spring 182 .131017 .03 Altitude Main Jet – ST168F-1040027 Stud, Bolt ST188F-1040002 Retainer, Intake Valve ST188F-1040008 Retainer, Exhaust Valve ST188F-1040009 Rotator, Exhaust Valve ST188F-1040028 Guide Plate, Push Rod REV 93020-20120419 ST188F-1040021 Shaft, Rocker Arm...
  • Page 28: Warranty

    Warranty Qualifications – Accessory parts such as starting batteries, and storage covers . Champion Power Equipment (CPE) will register this – Failures to due acts of God and other force majeure warranty upon receipt of your Warranty Registration Card events beyond the manufacturer’s control .
  • Page 29 The California Air Resources Board (CARB) and the United States Environment Protection Agency (U.S. EPA.) Emission Control System Warranty Your Champion Power Equipment (CPE) engine complies with both the U.S. EPA and state of California Air Resources Board (CARB) emission regulations.
  • Page 30 EMISSION CONTROL SYSTEM WARRANTY The following are specific provisions relative to your Emission Control System Warranty Coverage. 1. APPLICABILITY: This warranty shall apply to 1995 and later model year California small off-road engines (for other states, 1997 and later model year engines). The ECS Warranty Period shall begin on the date the new engine or equipment is delivered to its original, end-use purchaser, and shall continue for 24 consecutive months thereafter.
  • Page 31 You must take your CPE engine or the product on which it is installed, along with your warranty registration card or other proof of original purchase date, at your expense, to any Champion Power Equipment dealer who is authorized by Champion Power Equipment, Inc. to sell and service that CPE product during his normal business hours.

Table of Contents