Deluxe Fusion Audio System - Master Spas Down east Owner's Manual

A. Turn on the Digital Media Locker™ by pressing the POWER button on the locker.
B. Within 3 seconds press and hold the MODE button on the remote for more than 10 seconds. The

deluxe fusion audio system

remote will now be paired/synchronized.
i
The remote control uses state-of-the-art technology and will inform you if the dock is receiving the
command from the remote control. In any case, if the LCD displays "--" in either mode, this means
that your remote control is out of reception range. Please try the feature again.
Each Digital Media Locker™ comes with a matching RF (Radio Frequency) Wireless LCD remote control.
This remote is required to use any functions on the unit. For any additional remote controls you will need
to activate/synchronize those remote controls to the system by following the steps above.
i If you lose your remote control and buy a replacement, follow the steps above to pair/synchronize
before normal usage.
i
If your music player is not an iPod, you will not be able to control track or receive track information.
i
In order to prolong remote battery life the LCD will shut off after 20 seconds if no other button is pressed. To turn remote back on, press
any button once and then press the command desired.
caUTION –
caUTION –
components; and
Do not operate the Audio / Video controls while inside the spa.
WaRNINg –
cable, additional speakers, headphones, additional Audio / Video components, etc.) to the system.
NOTe: These units are not provided with an outdoor antennae; when provided, it should
be installed in accordance with article 810 of the National electrical code, aNSI / Nfpa 70.
NOTe: do not service this product yourself as opening or removing covers may expose
you to dangerous voltage or other risk of injury. Refer all servicing to qualified service
personnel.
DO NOT DIVE.
Risk of Electric Shock. Do not leave compartment door open.
Risk of Electric Shock. Replace components only with identical
Prevent Electrocution. Do not connect any auxiliary components (for example
47