Filter Cartridge Life
Taste and Odor Cartridges: A taste and odor cartridge contains activated carbon. When new, open the
filtered water faucet and allow fine, carbon particles to purge from the cartridge. Flush for 10 minutes. It
is recommended to replace filter cartridge every six months of use. There are several variables that
determine how long a cartridge will last. These include:
1. How much water you use, and
2. How much sediment, taste and/or odor, or other unwanted substance, is in the water.
Use the following information as a guide. However, no matter which type of cartridge you are using, you
will know it is time to replace them when you first notice the return of the unwanted sediment, taste
and/or odor in your water, or when the flow diminishes or stops.
Undersink Full Flow Water Filtration System model WHEUFF with replacement element
WHEURF conforms to NSF/ANSI 42 and 53 for the specific performance claims as verified and substan-
tiated by test data. The rated capacity for this system is 2000 gallons (7570 liters) at a rated service flow
of 2.0 gallons per minute (7.57 liters per minute).
Filter Cartridge Replacement
NOTE: There is no need to shut off the water supply when replacing the filter cartridge.
1. Turn filter cartridge to the left to remove cartridge from the filter head.
2. Dispose of the cartridge in a proper manner.
3. Install new cartridge. Turn cartridge to the right to re-attach to the filter head.
Taste and Odor Cartridges: Taste and odor cartridges contain activated carbon, a black powder.
When new, open the filtered water faucet and allow fine, carbon particles to purge from the cartridge.
Flush for 10 minutes.
Turn filter cartridge to the left
Turn filter cartridge to the right
Questions? Call Toll Free 1-866-986-3223
When you call, please be prepared to provide the model number and date code, found on the filter head.
Register for reminders to change filters
to remove from head
to attach to head
or visit whirlpoolwatertreatment.com
Monday- Friday, 8 AM - 7 PM EST