Table of Contents
Advertisement
AirCard 762S Mobile Hotspot User Guide
36
Update the firmware from the LCD screen
When new firmware is available for downloading, you will receive a message on the LCD
screen. (The message remains on the screen for 1 minute.)
Firmware Update Available
Press
to download
1. While the message is on the LCD screen, press the Power key to download the
firmware. You can continue to use the mobile hotspot while the firmware is being
downloaded.
If the battery is low, you will be instructed to use the AC adapter to plug the mobile
hotspot into a wall socket before continuing.
2. When the firmware download is complete, you'll be given the option to install the
firmware.
If you do not update the firmware, either from the LCD or the homepage, this mes-
sage repeats three times, 8 hours apart, and then after a further 8 hours the firm-
ware automatically updates the next time you turn the mobile hotspot on.
Firmware Update Available
(device may be unusable for
about 5 minutes)
Press
to install
Note:
You cannot use the mobile hotspot during the firmware installation, which may take up to 5
minutes.
3. Press the Power key to install the firmware.
4. When the firmware update is complete, reconnect your laptop or other Wi-Fi
devices to your mobile hotspot Wi-Fi network.
2400325
Advertisement
Table of Contents
