Table of Contents
Advertisement
AirCard 762S Mobile Hotspot User Guide
14
Install the Battery
1. Insert the battery as shown in the illustration. Ensure that the gold contacts on the
battery are lined up with the gold contacts on the device.
Battery
2. Replace the back cover.
Note:
Depending on your service provider, the battery may come partially-charged and ready to
go. When the battery needs recharging, follow the instructions in
page 34.
Connect to the Internet
Note:
Your mobile hotspot does not need to be connected to the computer with the USB cable to
connect to the Internet. The USB cable is used mainly for recharging the battery. (If you want to
connect to the Internet with the mobile hotspot tethered to the laptop with the USB cable, see
Tethered mode before connecting for the first time.)
To connect to the Internet:
1. Press and hold the Power key for a few seconds to turn on the mobile hotspot.
· The first time you turn on the mobile hotspot with a new SIM, the device starts
and then, after a few seconds, automatically restarts to use the profile infor-
mation on the new SIM.
· The first time you turn on the mobile hotspot, you'll be asked to select a language
on the LCD. (See
Select a Language
again later from the homepage.
The mobile hotspot automatically searches for and connects to your service pro-
vider's mobile broadband network. You can also connect to your service provider's
network from the dashboard. See
Note:
If you cannot connect to the mobile broadband network, you may need to create or update
a profile. See
Create or update a profile
Gold contacts
Default
security credentials
Recharge the Battery
on page 21.) You can change the language
Dashboard mode
on page 11.
on page 44.
on
2400325
Advertisement
Table of Contents
