Removing The Engine Guard (Exc Six Days, Exc Aus); Installing The Engine Guard (Exc Six Days, Exc Aus) - KTM 2013 450 EXC SIX DAYS EU Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.50

Removing the engine guard (EXC SIX DAYS, EXC AUS)

11.51

Installing the engine guard (EXC SIX DAYS, EXC AUS)

–
Inject the liquid into the system until it escapes from openings
cylinder without bubbles.
–
To prevent overflow, drain fluid occasionally from the master cylinder reservoir.
–
Remove the bleeding syringe. Mount and tighten screws bleeder screw.
–
Correct the fluid level of the hydraulic clutch.
Guideline
Fluid level below container rim
–
Position the cover with the membrane. Mount and tighten the screws.
101367-10
–
Turn quick release
guard.
601637-10
–
Attach the engine guard on the frame at the rear and swing up at the front.
–
Turn quick release
601638-10
4 mm (0.16 in)
counterclockwise until it disengages. Remove the engine
1
clockwise all the way.
1
68
of the master
6