Table Of Zones; Interpreting Zone Diagnostics - Viper 5901 Owner's Manual

Disarm 3
Disarm 4
Disarm 5

Table of zones

A zone is represented by the number of LED flashes used by the system
to identify a particular type of input. Standard input assignments are
listed in the following table, along with spaces to write in any optional
sensors or switches that have been installed.
Zone Description
1 Trunk Pin
2 Instant trigger: a heavier impact
detected by the onboard shock
sensor
3 Door switch trigger
4 Instant trigger: For optional
sensors
5 Ignition trigger
6 Hood Pin

Interpreting zone diagnostics

Warn Away responses are not reported by arming or disarming diag-
nostics. If you receive a Bypass notification when arming or a Tamper
Alert notification when disarming, look at the LED on the control cen-
ter.
Active or triggered zones will be indicated by a pattern of blinks by
the LED.
© 2008 Directed Electronics. All rights reserved.
disarmed with Low battery indicator
System disarmed with Tamper Alert
System disarmed with NPC active.
Dealer installed options
43