Feature
On
Button press
beep
System type
Remote start
& Security
Clock set
Clock time
Menu option descriptions
Auto keypad lock
Automatically locks the remote buttons when the buttons are not used for
Press
then
Note: If the auto keypad lock feature is programmed On, the remote auto-
matically unlocks when the vehicle ignition is turned Off. The remote stays
doors with the remote. When the
lock feature resumes normally.
Page On or Off and Power save
four seconds, and reports any alarm triggers (if the system is within the
operating range).
system. In the paging Off mode the remote will only beep and report when
a button on the remote is pressed.
are pushed for 72 hours. The timer resets each time a button is pressed.
Receive command confirmations on the remote with vibrations, beeps or
both, or with display only.
© 2008 Directed Electronics. All rights reserved.
Opt 1
Opt 2
Off
Remote start
Back
to unlock the keypad.
Opt 3
Opt 4
back
Back
button is pressed, the keypad auto
not check the status of the
Opt 5
37