Operating Your Vehicle; Turn Signal/Wiper/Washer/High Beam Lever - Chrysler Town & Country 2010 User Manual

OPERATING YOUR VEHICLE

TURN SIGNAL/WIPER/WASHER/HIGH BEAM LEVER

Turn Signal/Lane Change Assist
• Tap the lever up or down once and the turn signal (right or left) will flash three
times and automatically turn off.
• Vehicles equipped with Blind Spot Monitoring may be programmed to add a visual
alert when signaling a lane change; refer to your Owner's Manual on the DVD for
operation.
Front Wipers
Intermittent, Low And High Operation
• Rotate the end of the lever to the first detent position for one of five intermittent
settings, the second detent for low wiper operation and the third detent for high
wiper operation.
Rain Sensing Wipers
• This feature senses moisture on the vehicle's windshield and automatically
activates the wipers for the driver when the switch is in the intermittent positions.
Refer to Programmable Features in Getting Started for further details.
Mist
• Push the end of the lever inward to the first detent when a single wipe is desired.
Washer Operation
• Push the end of the lever inward to the second detent and hold for as long as spray
is desired.
Rear Wiper
• Rotate the center portion of the lever forward to the first detent for rear wiper
operation.
21