Adjustable Pedals; Programmable Features - Chrysler Town & Country 2010 User Manual

GETTING STARTED

ADJUSTABLE PEDALS

Do not adjust the pedals while the vehicle is moving. You could lose control and
have an accident. Always adjust the pedals while the vehicle is parked.
Do not place any article under the adjustable pedals or impede its ability to move,
as it may cause damage to the pedal controls. Pedal travel may become limited if
movement is stopped by an obstruction in the adjustable pedal's path.

PROGRAMMABLE FEATURES

Electronic Vehicle Information Center (EVIC) – If Equipped
• The EVIC can be used to program the following Personal Settings. Press and
release the MENU button
button to scroll through the settings. Press the RESET button
setting.
• Language
• Auto Door Locks
• Auto UNLK On Exit
• RKE Unlock
• RKE Linked To Memory
• Flash Lamp Lock
• Headlamp Off Delay
• Easy Exit Seat
• Tilt MIRR. In Reverse
• Turn Headlamps On With Remote Key
Unlock
• Press the switch located on the left side of
the steering column forward to move the
brake and accelerator pedals away from
the driver and press the switch rearward to
move the pedals closer to the driver.
NOTE: The pedals cannot be adjusted when
the vehicle is in REVERSE or when the
Electronic Speed Control is set.
WARNING!
CAUTION!
until Personal Settings displays, then press the STEP
• Rain Sensing Intermittent Wipers
• Key-Off Power Delay
• ILLUMIN. Approach
• Blind Spot Alert
• Park ASST. System
• Display Units of Measure In
• Door Alert
• Automatic High Beams
• Display ECO
• Sound Horn With Remote Key Lock
18
to change the