Table of Contents
Advertisement
USING THE XDM4600
Zone Keypad (XDM46K)
From any Zone Keypad, you can talk and listen on the intercom, and you can control the music for the entire system
(party mode) or for the local zone only. With the universal Remote Control (XDM46R), you can control all audio
sources from a Zone Keypad.
Power
The POWER button on a Zone Keypad allows a user at a zone to turn the audio source on and off for the entire system,
or turn the audio source on and off at the local zone only. When the keypad power is on, the buttons are highlighted
with a soft blue backlight. When the power is off, the blue backlight is off.
Note:
When the power at a local zone is turned off, the intercom continues to function.
• To turn on the system music, press the POWER button on any Zone Keypad and hold it for at least 3 seconds. The
system automatically plays the audio sources that were previously selected at each keypad, and the music is heard
through all Zone Keypads.
• To turn off the system music, press the POWER button on any Zone Keypad and hold it for at least 3 seconds. The
music to all Zone Keypads is turned off.
• To turn on music for a local zone only, press and release, in less than 3 seconds, the POWER button on the Zone
Keypad. The system automatically returns to the source that was previously selected. The music is heard through the
local Zone Keypad only. To change the audio source, press one of the audio source buttons on the Zone Keypad.
• To turn off the music at a local zone only, press and release, in less than 3 seconds, the POWER button. All music is
turned off for the local zone. The intercom continues to function.
Volume
Music and intercom volume are independent of one another and are controlled separately.
Music Volume
The volume buttons on the Zone Keypad control the volume for that keypad only.
• To adjust the music volume, press VOLUME UP or VOLUME DOWN. The volume indicator lights show the
volume level.
• When the Zone Keypad is turned off and then turned back on, the music volume is reset to the default level.
• You can also adjust the music volume using the Remote Control volume buttons, which are preprogrammed
for this function.
Note:
If you go into learn mode and transfer volume functions from another remote,
this preprogrammed function is overridden and permanently lost.
Intercom Volume
When the LISTEN function is activated on the intercom, you can change the volume of the intercom.
• To adjust the intercom volume, press VOLUME UP or VOLUME DOWN.
• The set volume level is remembered and used the next time you enter Listen mode.
4
M&S Systems
2861 Congressman Lane
Dallas,Texas 75220
800.877.6631
www.mssystems.com
Advertisement
Table of Contents
