Installing A Local Audio Source Wall Plate; Figure 14-Optional Local Audio Source Zone Wall Plate - M&S Systems XDM4600 Owner's Manual

Installing a Local Audio Source Wall Plate

With the optional Wall Plate, you can connect a local audio source; such as a child's own CD player or television, to
the local Zone Keypad. Audio from the local source is accessible through the local Zone Keypad only. It is not available
for Party Mode. See Figure 14 for a wiring schematic.
• DO NOT install Wall Plates in stud cavities that contain 120/240V appliance wiring, or within 18 inches of
fluorescent lighting, dimmers, security wiring, and other control wiring.
• The wall plate is installed in a single gang electrical box.
• The wall plate uses a CAT 5 cable to connect to the keypad.
• DO NOT place Wall Plates in air return cavities or walls that contain plumbing.
• Place Wall Plates within six feet of the Zone Keypad. The Wall Plate can be located farther away, but may
result in adding noise to the system.
• Place the Wall Plate at the same height from the floor as household electrical outlets.
Figure 14—Optional Local Audio Source Zone Wall Plate
M&S Systems 2861 Congressman Lane Dallas,Texas 75220 800.877.6631
XDM 4600
www.mssystems.com 23