Before You Begin - Trigon Dialog Owner's Manual

replacement of defective components. Warranty repair is usually done at the factory.
Further claims are excluded.
The warranty excludes all damage caused by improper installation, improper
operation or resulting from repairs by unauthorized dealers and/or individuals.
Furthermore, this warranty does not cover units with obliterated or missing serial
numbers. Likewise, shipping damage or damage caused by accidents are not
covered under warranty.
Please make sure to complete the included warranty card. The 3-year warranty eriod
starts from the date of delivery by the dealer. Keep the warranty card and proof of
purchase.
3.

Before You Begin

After unpacking the preamp and power supply, both components should be allowed
warm up to ambient temperature. Especially during the cold season humidity may
form inside a component as it is moved from the cold to a warm environment.
Once the devices are acclimatized, we recommend that you first get acquainted with
your new DIALOG preamplifier. The first step will be to connect the outboard power
supply's captive low-voltage cable (5) to the DC input jack (20) on the back of the
DIALOG's main chassis. Then plug the included TRIGON VOLT power cord to the
power imput socket (6) on the power supply and the AC plug to the mains. Now turn
on the power supply with the switch (8) on the back of the PSU.
DIALOG
PSU Front View
1 2 3
DIALOG
PSU Rear View