Toa D-2008SP Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Toa Manuals
  4. Music Mixer
  5. D-2008SP
  6. Operating instructions manual

Toa D-2008SP Operating Instructions Manual

D-2000 series digital mixer
Hide thumbs Also See for D-2008SP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Operating Manual
DIGITAL MIXER
Thank you for purchasing TOA's Digital Mixer.
Please carefully follow the instructions in this manual to ensure long, trouble-free use of your equipment.

TABLE OF CONTENTS

........................................................................... 2
............................................................ 3
.......................................................................... 5
..................................................................................... 10
........................................................................................ 11
.................................................................... 12
..................................................................... 16
....................................................................... 17
............................................................................. 18
...................................................................... 18
............................................................................. 20
..................................................................... 22
........................................................................... 23
............................................................................................ 23
................................................................................ 24
....................................................................................... 24
OPERATING INSTRUCTIONS
D-2000 Series
(Version 4)
........................... 13
............................................ 14
................................................. 15
.............. 19
..................................... 19
.............................. 21
................................................ 21

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D-2008SP and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Toa D-2008SP

Summary of Contents for Toa D-2008SP

  • Page 1: Table Of Contents

    ..............18 3.2.4. Switching Line Inputs (valid only when the D-936R or D-937SP module is installed) ....19 3.2.5. D-2008SP level indicator control (LED control) ........19 3.2.6. Fader layer switching ................20 3.2.7. D-2008SP control output ON/OFF (console switch) ......

  • Page 2: Version

    • The unit is a precision audio component. To prevent failure, do not give the unit strong shocks or vibrations. • When mounting the D-2008SP in an equipment rack, be sure to mount a perforated panel larger than 1U size* above and below the unit.

  • Page 3: Nomenclature And Functions 2.1. D-2008Sp Digital Mixing Processor Unit

    2.1. D-2008SP Digital Mixing Processor Unit The D-2008SP Digital Mixing Processor Unit is designed to have up to 32 audio inputs and outputs in total. A built-in multiple signal processing functions permit the unit to be used as both a mixer and a signal processor.
  • Page 4 (For the relationship between the indicator and D-2008SP status, refer to the table on 7. Key lock indicator (Red) Lights when key lock function is enabled. 20. SYSTEM RUN indicator (Green) Lights when the unit is in normal operation, and 8.

  • Page 5: D-2012C Remote Console Unit

    Contact your TOA dealer. 2.2. D-2012C Remote Console Unit The D-2012C is designed to be used with the D-2008SP Digital Mixing Processor. The D-2012C can be LAN- connected to the D-2008SP Processor to allow remote operation of input and output channel volume adjustment, signal level monitoring, contact control and preset memory recall, etc.
  • Page 6 Write the name of the function assigned to the key, etc. in these spaces. 3. LAN connection indicator Displays the connection status of the D-2008SP 6. Function keys (1 – 8) to be controlled. Execute contact control, preset memory recall or...
  • Page 7 11. Motorized faders (1 – 12) disabling monitoring. Adjust the volume of each input or output It can be enabled to switch the D-2008SP's channel. With reference to fader position "0," the selection channel on the D-2000 Setting position "–∞" provides the minimum volume, and Software in synchronization with this key position "+10"...
  • Page 8 • D-Section Note: Refer to p. 7 for names and functions of parts 7 – 10. 12. Rotary encoders (1 – 8) Adjust the volume of each input or output channel. The volume increases as the encoder is rotated clockwise, and decreases as it is rotated counterclockwise.
  • Page 9 • E-Section 13. Line input signal level indicators [SIGNAL, PEAK] Display the signal level set with the Line input volume control (15). The SIGNAL indicator lights when a signal exceeding the reference level of –20 dB is fed to the line input terminal. If a signal at the line input terminals clips, the PEAK indicator lights.

  • Page 10: D-911 Vca Fader Unit

    The D-911 VCA Fader Unit is designed for use with the D-2008SP. Connecting to the D-984VC VCA Control Module installed in the D-2008SP permits volume adjustment of input and output channels and contact controls of the D-2008SP. For details, refer to the instruction manual enclosed with the D-911.

  • Page 11: Operations 3.1. D-2008Sp Operation

    3. OPERATIONS 3.1. D-2008SP Operation Using the front panel-mounted keys, preset memories can be recalled, and input or output channel to be monitored can be selected. Input or output channel can be monitored through headphones connected to a front panel-mounted headphone jack.

  • Page 12: Recalling Preset Memories

    Setting Software or D-2012C Remote console unit. Note When multiple D-2008SP and D-2012C units are installed in the system, the D-2008SP with ID1 must be included to simultaneously operate other units in the system through the following operation. Step 1. Press the Selection key " " or " " several times to light PRESET "PRESET"...

  • Page 13: Selecting The Input Or Output Channel To Be Monitored

    3.1.2. Selecting the input or output channel to be monitored D-2008SP's input or output channels in operation can be monitored. Step 1. Press the Selection key " " or " " several times to light "MONITOR" (Item selection indicator). MONITOR Lights Step 2.

  • Page 14: Selecting The D-2012C's Monitor Channels

    3.1.3. Selecting the D-2012C's monitor channels The line input and headphone output of the D-2012C Remote Console connected to the D-2008SP processor's Monitor bus terminal can be monitored. Note Before selecting, connect the D-2008SP's Monitor bus terminal to the D-2012C's Monitor bus terminal and perform console settings using the D-2000 Setting Software.

  • Page 15: Selecting Cobranet's Monitor Channels

    3.1.4. Selecting CobraNet's monitor channels When the D-2000CB CobraNet Interface Module has been inserted into the D-2008SP and connected to other CobraNet equipment, CobraNet's input and output channel preprogrammed using the D-2000 Setting Software can be monitored. Step 1. Press the Selection key " " or “ " several times to light CobraNet "CobraNet"...

  • Page 16: Key Lock Function On/Off

    3.1.5. Key lock function ON/OFF Enabling the key lock function disables the following operations made on the D-2008SP's front panel. • Recalling preset memories • Selecting the input or output channel to be monitored • Selecting the D-2012C's monitor channels •...

  • Page 17: D-2012C Operation

    23.) • External Control Switch Allows the D-2008SP with ID 1 to transmit the function key ON/OFF data to an AMX or other external control devices using external control protocol. The external control device can transmit the external control command to the D-2008SP with ID 1, controlling its function key's indicator ON or OFF.

  • Page 18: Preset Memory Recall

    3.2.2. Preset memory recall Each parameter stored as preset memory using the D-2000 Setting Software or the D-2012C can be recalled. [Operation] Pressing the Memory key switches the operation panel settings to the setting status Memory 1 stored under the designated preset memory number. In this event, the depressed key lights.

  • Page 19: Switching Line Inputs (Valid Only When The D-936R Or D-937Sp Module Is Installed)

    The figure shows an example in which "Line Input (In 4)" has been assigned to Function key 4. 3.2.5. D-2008SP level indicator control (LED control) This function turns off the level indicators on the front panel of the D-2008SP Digital Mixing Processor. Level indicators D-2008SP...

  • Page 20: Fader Layer Switching

    3.2.6. Fader layer switching There are 12 motorized faders and 8 rotary encoders on the D-2012C's operation panel. Store a combination of their channel assignments as a single fader layer in advance using the D-2000 Setting Software. Since 4 different fader layers can be set, up to 4 channels can be assigned to each motorized fader and rotary encoder.

  • Page 21: D-2008Sp Control Output On/Off (Console Switch)

    The figure shows an example in which "Console switch" has been assigned to Function key 6. 3.2.8. D-2008SP (ID 1) external control switch Allows the D-2008SP with ID 1 to transmit the function key ON/OFF data to an AMX or other external control devices using external control protocol (RS-232C or LAN).

  • Page 22: Key Lock Function On/Off

    3.2.9. Key lock function ON/OFF Setting the Key Lock function to ON allows operation of the following keys to be disabled: the D-2012C's operation panel-mounted function keys (except the Key Lock key), motorized faders, rotary encoders, Monitor Channel Selection keys, and Channel ON/OFF keys. Key lock indicator (Lockable operation section) D-2012C...

  • Page 23: Monitor Channel Clear

    Notes • Set the identical ID number for the D-2008SP and D-2012C to be connected through monitor bus terminals. Use the D-2000 Setting Software to set the ID number. • Properly perform connections and settings for the D-2008SP's monitor input/output channels. For connections and settings, refer to the separate installation manual.

  • Page 24: D-911 Operation

    • Fader position "10" of the D-911 provides the channel gain set by the D-2008SP. As a guide, fader position "8" provides channel gain about 10 dB lower than the set gain at the D-2008SP.

This manual is also suitable for:

D-2012cD-2000 series

Table of Contents