Remote Control Unit; Basic Operation - Teac MC-DX40DAB Owner's Manual

Remote Control Unit

The provided Remote Control Unit allows the unit to be operated
from a distance.
When operating the remote control unit, point it towards the
remote sensor on the front panel of the unit.
Even if the remote control unit is operated within the effective
<
range, remote control operation may be impossible if there are
any obstacles between the unit and the remote control.
If the remote control unit is operated near other products which
<
generate infrared rays, or if other remote control devices using
infrared rays are used near the unit, it may operate incorrectly.
Conversely, the other products may also operate incorrectly.
Battery Installation
1
2
3
1
Remove the battery compartment cover.
2
Put in the lithium battery (CR2025, 3V) with the positive side (+)
facing outside.
3
Close the cover.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the battery is exhausted. In this case, replace
the battery with a new one.
Precautions concerning batteries
Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.
10

Basic Operation

1 Turn on the subwoofer.
(Rear panel of the subwoofer)
2 Press the STANDBY/ON button (
3 Select a source by pressing the FUNCTION button.
2
3
4
) on the main unit.