Table of Contents
Advertisement
4
Press the skip button (. or /) repeatedly to select a
track, then press the MEMORY button.
CD
MP3
The track/file is programmed, and "P-02" is displayed.
3
4
Repeat steps
and
to program more tracks/files.
<
You can program up to 32 tracks.
<
5
When the selection of track numbers is completed, press
the play/pause button (G/J) to start program playback.
When the playback of all the programmed tracks/files has
<
finished, or if you press the stop button (H), the "Mem" indicator
will go off and the program mode will be cancelled. Still the
program is retained in memory.
You can return to the programmed playback by pressing the
MEMORY button and the play/pause button (G/J).
Shuffle function does not work during programmed playback.
<
When there is a folder which contains the files other than MP3
<
and WMA (such as JPEG files) is included in a disc, the program
may not function correctly. Program the MP3 and WMA files only.
To check the programmed order
In the stop mode, press the MEMORY button repeatedly. The
track number and program number will be shown on the display.
To add a track to the end of the program
In the stop mode, press the MEMORY button repeatedly until "00"
or "000" appears on the display. Select a track number using the
skip button (. or /) and then press the MEMORY button.
The track is added to the end of the program.
To overwrite the program
In the stop mode, press the MEMORY button repeatedly until the
program number to be changed appears on the display.
Select a new track number using the skip button (. or /)
and then press the MEMORY button.
To clear program
If one of the following buttons is pressed, the programmed contents
will be cleared:
open/close (L), FUNCTION, FM/DAB, STANDBY/ON
If the unit is disconnected from the power supply, the
<
programmed contents will be cleared.
1
Hide quick links:
Advertisement
Table of Contents
