Tools; Site Survey - Teltonika RUT100 User Manual

3G Mobile Router
Reset – click to reset the device to factory default values.
After clicking the Reset button, the confirmation message appears:
Figure 22. Reset to Factory Defaults Confirmation
Reset. Click to reset the device to factory default values.
Cancel. Click to cancel reset process.
Note: Resetting the device is an irreversible process. Current configuration and the
administrator password will be set back to the factory default.
If there are any problems with router the troubleshoot file may be downloaded. It contains
router configuration information, messages and troubleshoot data.
Figure 23. Troubleshoot file download

4.7 Tools

Use the Tools menu to use the following device applications:
4.7.1
The Site Survey test shows overview information for wireless networks in a local geographic
area. Using this test, an administrator can scan for working access points, check their operating
channels, encryption and see signal/noise levels. An administrator can use this feature to identify a
clear channel to set the device.
Note: Note that Site Survey function can take several minutes to perform.
A Site Survey test is performed every time on the startup of the device, therefore the results
of the last performed Site Survey test and its time can be found on the page. Thus, to obtain the
results, the initiation of the scan is not necessary. To perform the Site Survey test currently, click the
Scan button:
Site Survey – to view the list of wireless networks in local graphical area.
•

Site Survey

User Manual
23