Teltonika RUT100 User Manual page 18

3G Mobile Router
Note: Setting a lower fragmentation threshold value can help improve connection reliability
in noisy environments (where radio interference is present). This mechanism does add overhead and
therefore reduces effective throughput.
RTS. specify the maximum packet size beyond which the wireless LAN card invokes it's
RTS/CTS mechanism [0-2347/off/auto]. Packets that exceed the specified RTS threshold trigger
the RTS/CTS mechanism. The card transmits packets smaller than this threshold without using
RTS/CTS. Default: off.
Note: Setting a lower RTS threshold value can improve connection reliability and
throughput in crowded wireless LAN environments (where many clients are trying to communicate
simultaneously). It adds a certain amount of overhead, but can compensate for this by reducing
bandwidth lost due to collisions.
Enable VLAN. Enable Virtual Local Area Networks (VLAN) function.
Throughput enhancements (available only on G mode).
Quality of service (WMM). Check box to enable applications such as audio, video and
voice applications have higher priority than less-sensitive data applications.
User isolation. Check the box to isolate the wireless clients from communicating with each
other.
Inter AP client isolation. Check the box to enable internal wireless network users isolation.
Figure 13. Wireless network authentication settings.
Broadcast SSID. Check the box to enable SSID broadcast.
Authentication Method. Choose the authentication method for wireless network.
Fast Frames – packet aggregation and timing modifications.
Packet Bursting – more data frames per given time period.
Compression – standards based (Lempel Ziv) real-time hardware compression.
Open system – no encryption.
WPA-PSK-AES – choose the WPA security with passphrase
Passphrase – specify the passphrase [8-63 characters].
WPA-PSK-TKIP – choose the WPA security with passphrase, encrypted by the
TKIP (Temporal Key Integrity Protocol) algorithm.
Passphrase – specify the passphrase [8-63 characters].
WPA2-PSK-AES – choose the WPA2 security with passphrase, encrypted by the
AES algorithm.
User Manual
18