Control Settings; Storage Drawers - GE MTS18GS Owner's Manual And Installation Instructions

About the control on the refrigerator.
Freezer Temp Control
Min is Cold
Middle is Normal
Max is Coldest

Control Settings

Refrigerator Control
When first powered all lights are illuminated for 3 seconds . T he
factory setting 3 is displayed after 3 seconds .
Change setting by pressing SET key, each time you press it will
advance by 1 . Press until the desired setting is achieved . Adjust
controls one increment at a time to determine your preferred
setting . Allow 12 hours after each adjustment for the refrigerator
reach the temperature you have set . Setting 1 is the warmest
5 is the coldest .
Standby Mode
When the refrigerator is in ON, Press SET for 3 seconds the
refrigerator will go into standby mode, the standby indicator
light will be on .
Standby setting will stop cooling in both the refrigerator and
freezer compartments but does not shut off electrical power to
the refrigerator .
Revert to normal operation by pressing the SET button ,the
standby light will go off, it will go back to the last setting .
About the storage drawers.
4
There is a temperature control in the fresh food compartment as well as the freezer
compartment. Initially set the control to the recommended normal settings in the fresh food
and freezer compartments. Allow 24 hours for the temperature to stabilize.
Fruit and Vegetable Drawers
These storage drawers provide space to store
fruits, vegetables and meats .
Fresh Food Temp Control
1 is cold
5 is coldest
After each adjustment, check both the freezer and the fresh
food compartments . Changing the fresh food control will affect
the temperature of the freezer compartment . Likewise, changing
the freezer control can affect the temperature of the fresh food
compartment .
Control settings will vary based on personal preferences, usage
and operating conditions and may require more than one
adjustment . Factors that affect temperature include the amount
of food in the fresh food and freezer compartments, frequency
of door opening, and temperature of food when placed in either
compartment .
To remove and replace the drawers and the
cover above them, the door must be fully
opened . In some installations, the refrigerator
may have to be moved away from the wall for
the door to be fully opened .