Chrysler 1991 Service Manual Supplement page 139

24 - 6 AIR CONDITIONING (5.9L DIESEL)
CLUTCH
SHIM
J8924-30
J8924-32
Fig. 15 Remove Clutch Shim
(6) Remove shaft seal seat retaining snap ring with
pinch type snap ring pliers (Fig. 16).
(7) Remove the shaft seal seat, using seal seat tool
(Fig. 17). , ,
(8) Insert the Seal Remover and Installer Tool
against the seal assembly. Press down against the
seal spring and twist the tool until it engages the
slots of the seal cage (Fig. 18). Lift out seal assembly.
INSTALLATION
(1) Clean seal cavity thoroughly with a lint-free or
synthetic cloth and clean refrigerant oil. Then blow"
out with dry pressurized vapor.
SNAP
Fig. 17 Remove Shaft Seal Seat
J8924-31
J8924-33
Fig. 18 Remove Seal Assembly
(2) Make sure all foreign substances are thoroughly
removed.
(3) Insert Seal Sleeve Protector over compressor
shaft (Fig. 19).
(4) Do not touch the new seal lapping surfaces. Dip
the mating surfaces in clean refrigerant oil before
proceeding.
(5) Engage slots of Seal Remover and Installer to
new seal cage and insert seal assembly firmly into
place in the compressor seal cavity (Fig. 20). Twist
tool in opposite direction to disengage tool from seal
cage. Remove tool.
Fig. 16 Remove Snap Ring