Chrysler 1991 Service Manual Supplement page 77

I - 14 5.9L (DIESEL) ENGINES
Fig. 8 Marking Converter and Drive Plate for
Alignment Reference
(23) Disconnect all electrical connections from the
engine. Put tags on the connections to identify their
locations.
(24) Disconnect the fuel lines to the lift pump and
fuel return. Use tags to identify the lines (Fig. 9).
Fig. 9 Lift Pump and Fuel Lines
(25) Put a cover or tape over all engine openings.
(26) Make sure that the lifting brackets are
mounted with the eye up. If not, remove the bracket
and install in the proper position. Tighten the lifting
bracket bolts to 77 N-m (57 ft. lbs.) torque.
(27) Use the lifting brackets to apply tension to the
engine. Remove the engine mount through-bolts from
the cylinder block mounting bracket.
CAUTION: When removing the engine, take care not
to damage the wiper motor and voltage regulator
mounted on the dash panel ( F i g . 10).
Fig. 10 Vifiper Motor/Voltage Regulator
(28) Lift the engine out of the vehicle (Fig. 11).
ENGINE
J9109-11
Fig. 11 Lifting Engine from Vehicle
(29) Install the engine on a suitable stand.
(30) Remove all accessories and brackets not previ-
ously removed for use with the replacement engine.