Table of Contents
Advertisement
SERVICE AND ADJUSTMENTS
•
ATTACH FRONT LINK (E) - Work from left side of trac-
tor. Insert rod end of link assembly through front hole
in tractor front suspension bracket (F) and secure with
retainer spring (G) through hole in link located behind
the bracket.
F
G
•
Insert other end of link (E) into hole in front mower bracket
(H) and secure with washer and retainer spring (J).
•
Disengage belt tension rod (K) from locking bracket
(L).
L
K
E
H
Fig. 27
C
•
Install belt onto engine clutch pulley (M).
IMPORTANT: Check belt for proper routing in all mower
pulley grooves.
J
•
Engage belt tension rod (K) on locking bracket (L).
•
Raise attachment lift lever to highest position.
•
If necessary, adjust gauge wheels before op er at ing
mower as shown in the Operation section of this
manual.
M
B
A
S
D
Fig. 29
20
M
Fig. 28
CAUTION: Belt tension rod is spring
loaded. Have a tight grip on rod and
engage slowly.
F
E
H
Advertisement
Table of Contents
