Seat - Hyundai Accent Owner's Manual

1
FEATURES OF YOUR HYUNDAI
24
B230E04A-AAT
Installing a Child Restraint Seat with the
"Tether Anchorage" System (3 Door)
Three child restraint hook holders are located
on the vertical back panel. (behind rear bumper
bar)
To install the child restraint seat
1. Route the child restraint seat strap over the
seatback.
For vehicles with adjustable headrests,
route the tether strap under the headrest
and between the headrest posts, otherwise
route the tether strap over the top of the
seatback.
lcflhma-1a.p65 24
Covering Shelf
Tether Strap Hook
Back Panel
Front of Vehicle
B230E03A-1
2. Remove the blanking covers on the cover-
ing shelf.
9/24/04, 11:37 AM
3. Connect the tether strap hook to the child
restraint hook holder through the hole on
the covering shelf and tighten to secure the

seat.

!
WARNING:
Do not mount more than one child restraint
to a single tether or to a child restraint lower
anchorage point. The improper increased
load may cause the anchorage points or
tether anchor to break, causing serious
injury or death.