Hyundai Accent Owner's Manual page 31

1
FEATURES OF YOUR HYUNDAI
20
B210A01A-AAT
To Release the Seat Belt
B210A01L
The seat belt is released by pressing the re-
lease button in the locking buckle. When it is
released, the belt should automatically draw
back into the retractor.
If this does not happen, check the belt to be sure
it is not twisted, then try again.
lcflhma-1a.p65 20
B220A01A-AAT
SEAT BELTS (2-Point Static Type)
(Rear Seat Center)
To Fasten Your Seat Belt
HTB225
To fasten a 2-point static type belt, insert the
metal tab into the locking buckle. There will be
an audible "click" when the tab locks into the
buckle. Check to make sure the belt is properly
locked and that the belt is not twisted.
9/24/04, 11:37 AM
B220B01A-AAT
Adjusting Your Seat Belt
Too
high
Correct
Shorten
HTB226
With a 2-point static type seat belt, the length
must be adjusted manually so it fits snugly
around your body. Fasten the belt and pull on
the loose end to tighten. The belt should be
placed as low as possible on your hips, not on
your waist. If the belt is too high, it could in-
crease the possibility of your being injured in an
accident.