High-Voltage Ps Pcb Assy - Brother HL-2440 Service Manual

8.17 HIGH-VOLTAGE PS PCB ASSY

(1) Disconnect the two connectors from the High-voltage PS PCB ASSY.
(2) Remove the two Taptite cup S M3x6 SR screws and the two Taptite bind B M4x12
screws.
(3) Release the Hook to remove High-voltage PS PCB ASSY from the Drive sub ASSY.
Taptite bind B M4x12
Taptite cup S M3x6 SR
Note:
There are procedures for disassembling Main frame L ASSY after this procedure.
(8.31 MAIN FRAME L
3
1
Connector
High-voltage PS PCB ASSY
Fig. 3-33
ASSY)
3-39
Hook
Drive sub ASSY
Confidential