Distinguish Error Cause; Led Indication; Led Indication At Operator Calls - Brother HL-2440 Service Manual

2.

DISTINGUISH ERROR CAUSE

2.1

LED indication

2.1.1 LED indication at Operator Calls

Distinguish the contents of message by LED indication in the control panel. See the reference
page and take the corrective action described for each indication to correct it. when the red
Error LED is ON or blinking to indicate it, the machine automatically recovers from most errors.
But some of errors are necessary to reset the machine by holding down the [Go] button.
LED indication of the following table is that
LED is OFF,
LED
LED is ON and
Type of error
1) Toner low
2) Drum life end soon
3) Toner cartridge is at the
end of life
4) Cartridge position error
1-5
LED is blinking.
Error clearance by
pressing the Refer to:
[Go] button
N/A
N/A
N/A
N/A
1-9
1-9
1-9
1-10
Confidential