Presentation
These instructions describe two machine models,
Rider 850 and Rider 970.
Both models are fitted with engines from Briggs &
Stratton of 10.5, 12.5 and 15.5 hp.
Rider 850 has a cutting unit which throws out the
grass at the rear and a cutting width of 850 mm.
6
8
Location of the controls
1. Ignition lock
2. Throttle/Choke lever
3. Adjustment of cutting height
4. Lifting lever, cutting unit
5. Gear shift
6. Brake pedal
PRESENTATION
The machines have gearboxes of the in-line type,
with 5 forward gears and one reverse gear, which
enables selection of the best speed for mowing and
transport.
Rider 970 is available with three different cutting
units: unit with rear ejection or side ejection with a
cutting width of 965 mm, and a Bioclip unit with a
cutting width of 1030 mm.
7
4
5
3
9
10
7. Lock button for parking brake
8. Clutch pedal
9. Adjustment of seat
10. Fuel tank cap
11. Main lock (under seat)
2
1
11
E
9
English –