Account Codes; In/Out Of Group; Locking Your Station - Samsung OfficeServ 100 Series User Manual

To enter an account code by interrupting the conversation:
• While on an outside call perform a hookflash, receive confirmation tone,
and dial 47.
• Dial the account code or bin number (bin numbers are 3 digits, account
codes may be a maximum of 12 digits, and # may be used).
• Hookflash to return to the conversation.
• If you make an error, repeat the procedure with the correct code. Only the
most recent account code dialed will be recorded.
To enter an account code after the outside party hangs up:
• Perform a hookflash, receive confirmation tone, and dial 47.
• Dial the account code or bin number (bin numbers are 3 digits, account
codes may be a maximum of 12 digits, and # may be used).
NOTE: If you wait for the outside party to hang up, you must complete this proce-
dure within 10 seconds. You cannot repeat if an incorrect number is entered.

IN/OUT OF GROUP

If your station is assigned to a hunt group, this feature will allow you to dial an
access code plus the group number, e.g., 501, plus 0 to temporarily prevent your
station from receiving any group calls. You will still be able to receive calls that are
dialed directly to your station. To reenter the group, dial an access code plus the
group number, e.g., 501, plus 1.

LOCKING YOUR STATION

Make outside calls
Receive outside calls
Make intercom calls
Receive intercom calls
Make 911 calls
To lock your phone from making outgoing calls:
• Lift handset to go offhook and dial 15100 plus your station passcode
(default 1234) then dial 1.
• Listen for system dial tone and replace handset. Your station is now locked
from making outgoing calls.
Note*: When 911 is programmed, 911 emergency dialing is allowed for a LOCKED
OUTGOING station.
0
LOCKED OUTGOING
UNLOCKED
Hold Button LED Flashes
YES NO (ACCESS DENIED)
YES
YES
YES
YES
1
YES
YES
YES
YES*
2
LOCKED ALL CALLS
Hold Button LED Solid
NO
NO
NO
NO
NO
19