Operating Your Grill; Connecting Gas Cylinder - Bond GSF20JD Instruction Manual

CAUTION:
Use only the regulator provided. If a replacement is necessary, call our customer service center. The use of
unauthorized parts can create an unsafe condition and environment.
The propane gas supply cylinder used must be constructed and marked in accordance with the Specifications for
Propane Gas Cylinders of the U.S. Department of Transportation (DOT). Only cylinders with a listed overfill prevention
device (OPD) and marked "propane" may be used. Cylinders with an OPD will have valve handles with three "lobes"
(prongs).
Use only the pressure regulator and hose assembly supplied with the outdoor cooking gas appliance must be used.
Replacement pressure regulators and hose assembly must be those specified by the outdoor cooking gas appliance
manufacturer. Use only 20-pound cylinders equipped with a cylinder connection device compatible with the connection
for outdoor cooking appliances. The cylinder must include a collar to protect the cylinder valve. Do not drop or handle
the cylinder roughly. If the appliance is not in use, disconnect the cylinder.
Storage of the appliance indoors is permissible ONLY if the cylinder is disconnected and removed from the appliance.
Store cylinder outdoors and out of the reach of children.
enclosed areas. Never store your cylinder where temperatures can reach over 125℉.
Before connecting, make sure there is no debris caught in the head of the gas cylinder, regulator valve or in the head of
the burner and burner ports. Connect regulator valve and hand tighten firmly. Disconnect the propane cylinder from the
regulator valve when the grill is not in use. DO NOT obstruct the flow of combustion air or ventilation air to the grill.
Arrange the propane cylinder for vapor withdrawal and equipped with a listed overfill prevention device (OPD).
DANGER:
A fire causing death or serious injury may occur if the following is not followed exactly:
Never store or use gasoline or other volatile substances in the vicinity of this grill.
Never store a spare propane cylinder in the vicinity of this grill, or in the vicinity of another potential heat source.
Never fill the propane cylinder beyond 80% full.
This grill is designed to connect to a standard 20 lb L.P cylinder only, please refer to the Step 5 of assembly instructions for
the installation.
WARNING:
Don't store spare gas cylinder in or near grill.
LP (Propane) Gas Supply Connection
1. Always place the propane cylinder on the tank holder under the cart.
2. Always confirm that all burner control knobs are in the OFF position before activating the gas supply.
3. Before connection, be sure that there is no debris caught in the head of the gas cylinder, head of
the regulator valve, or in the head of the burner and burner ports.
4. Always connect the gas supply regulators as follows:
Insert the nipple of the valve coupling into the tank valve and tighten the connection collar
by turning it clockwise with one hand while holding the regulator with the other hand.
(See diagram to right.)
5. Disconnect the propane cylinder from the regulator valve when the grill is not in use.
6. Do not obstruct the flow of combustion air and ventilation air to the grill.
7. Keep ventilation openings of the cylinder enclosure free and clear from debris.
8. Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Install only the type of dust cap on cylinder
valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.
GSF20JD/GSF20JDS
Instruction Manual

Operating Your Grill

Do not store the cylinder

Connecting Gas Cylinder

10
in a building, garage or other