Bond GSF20JD Instruction Manual page 10

Step 6
a) Place the gas tank on the tank holder.
b) Rings the tank using tank clip (I).
c) Push down the two ends of tank clip into the notch of tank clip
support until its lock into place.
Step 7
a) Connect the tank with regulator by screwing the regulator
collar onto the tank valve. (See diagram to right )
b) Conduct the leak test on page 11 to make certain all
connections are connected securely.
Left Side
GSF20JD/GSF20JDS
Instruction Manual
Fully Assembled View
9
Right Side