Samsung SmartCam SNH-1010N Quick Start Manual page 7

+
1. Connect the network cable to the camera and to the home router as shown above wired
connection.
2. Register the camera according to Step 3 of Camera Installation.
n.
3. Select the camera according to Step 4 of Camera Installation and click the setup page
4. Click Network Setting - Wireless Network
5. Click Wireless On Button and Select Wireless Network Name
6. Input password of the Wireless Network
7. Click Apply Button
e
1
e
2
3
n
Wireless Connection without WPS
<Wireless Network>
No.
Wireless On/ You can select to activate or deactivate the wireless network
Wireless Off connection.
AP (Access Point) You will see a list of APs (Access Point) available. Select a
list desired one from the list of APs (Access Point).
If you select a secured AP (Access Point), you must enter the
AP (Access Point)
password before you can access the network.
password
For the password, contact your network administrator.

When the wieless network setting are completed, remove the LAN cable.
Description
1
2
3
English - 7