Cub Cadet 3000 Series Service Manual page 84

Cast Iron Transmission Disassembly
26. Remove all 14 hex bolts securing the left housing
to the right housing using a 1/2" socket. See Fig-
ure 18.
Perimeter Hex Bolts (14)
Figure 18
NOTE: Loctite all the screws during assembly.
27. Slowly remove the left housing from the axle
assembly. See Figure 19.
Figure 19
NOTE: Loctite sealer is used between the two
case halves during production, and a scraper
may be needed to separate the housings from
one another.
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
28.
29.
Right Housing
H alf
Actuator Arm
Hex Cap Screw
15A- 8
Pull on the differential lock actuator using a fish
scale, and make certain the differential engages
with less than 35 pounds of pull. See Figure 20.
Differential Lock Actuator Lever
Figure 20
Remove the hex cap screw securing the actuator
arm to the differential lock assembly using a
7/16" socket. See Figure 21.
Figure 21
Fish Scale
> 35 Lbs to engage