Cub Cadet 3000 Series Service Manual page 81

9. Remove the hydraulic pickup tube and inspect
for contamination. See Figure 6.
Hydraulic Pickup Tube
Figure 6
10. Remove and replace the "O" ring on each end of
the pickup tube. See Figure 7.
"O" Rings
Figure 7
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Cast Iron Transmission Disassembly1
11.
Inspect and cap the inlet ports
12.
15A- 5
Inspect and cap the input and output ports where
the hydraulic pickup tube was removed.
See Figure 8.
Figure 8
Remove the extension spring from the torque
bracket using a short piece of recoil rope. See
Figure 9.
Figure 9
Extension
Spring