Cub Cadet 3000 Series Service Manual page 36

Remove the gerotors inner star from the drive.
Figure 8.
Remove the spacer.
Figure 9.
Remove the drive from the spool/sleeve assembly.
Figure 10.
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
Remove the o-ring seal from the wear plate.
Figure 11.
Remove the wear plate from the housing assembly.
Figure 12.
Remove the o-ring from the control housing.
Figure 13.
6 - 3
Cub Cadet 3000