Reassemble The Hydraulic Valve In The Reverse Order Above - Cub Cadet 3000 Series Service Manual

Cub Cadet 3000
11. Inspect the "O" rings for damage. If damaged,
replace. See figure 4.
12. Remove all the remaining hardware from the
valve body using a 7/16 socket.
FIGURE 4.
13. Remove the valve mounting brackets. See
figure 5.
NOTE: Write down the correct positions of the
mounting brackets. The brackets can be installed
backwards if not properly marked.
14. Remove the squared lift link.
Valve Mounting
Bracket
Hydraulic
Valve
FIGURE 5.
REASSEMBLE THE HYDRAULIC VALVE IN THE
REVERSE ORDER ABOVE.
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
"O" Rings
Nylon Flange
Bearing
Squared
Lift Link
Valve
Mounting
Bracket
11 - 2