Cub Cadet 3000 Series Service Manual page 82

Cast Iron Transmission Disassembly11
13. Remove all four 5.5" hex bolts securing the
torque bracket, hydrostatic pump and long spac-
ers to the transmission housing using a 1/2"
socket. See Figure 10.
Torque
Bracket
Hex Bolts
Figure 10
NOTE: Both long spacers go on the bottom
bolts.
14. Remove the torque bracket assembly.
15. Remove the hydrostatic pump from the transmis-
sion housing. See Figure 11.
Hydrostatic Pump
Figure 11
K&T Saw Shop 606-678-9623 or 606-561-4983
www.mymowerparts.com
16.
17.
18.
•
•
•
15A- 6
Remove and replace the large "O" ring from the
transmission housing. See Figure 12.
"O" Ring
Figure 12
Remove the spring washer from the input bear-
ing. See Figure 13.
Spring Washer
Figure 13
Grasp both axles assemblies and rotate them as
follows:
Opposite directions
Forward direction - together
Reverse direction - together
NOTE: There should be no binding.